to learn more about on semiconductor, please visit our website at www.onsemi.com please note: as part of the fairchild semiconductor integration, some of the fairchild orderable part numbers will need to change in order to meet on semiconductors system requirements. since the on semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the fairchild part numbers will be changed to a dash (-). this document may contain device numbers with an underscore (_). please check the on semiconductor website to verify the updated device numbers. the most current and up-to-date ordering information can be found at www.onsemi.com . please email any questions regarding the system integration to fairchild_questions@onsemi.com . is now part of on semiconductor and the on semiconductor logo are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries in the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of on semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does on semiconductor assume any liability arising out of the application or use of any product or circuit, and specifcally disclaims any and all liability, including without limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. typical parameters which may be provided in on semiconductor data sheets and/or specifcations can and do vary in different applications and actual performance may vary over time. all operating parameters, including typicals must be validated for each customer application by customers technical experts. on semiconductor does not convey any license under its patent rights nor the rights of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classifcation in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semiconductor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its offcers, employees, subsidiaries, affliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affrmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner.
FDD86369 n-channel powertrench ? mosfet www.onsemi.com semiconductor components industries, llc, 2017 publication order number: january, 2017, rev. 1.0 FDD86369/d 1 FDD86369 n-channel powertrench ? mosfet 80 v, 90 a, 7.9 m features ? typical r ds(on) = 5.9 m at v gs = 10v, i d = 80 a ? typical q g(tot) = 34 nc at v gs = 10v, i d = 80 a ? uis capability ? rohs compliant applications ? powertrain management ? solenoid and motor drivers ? integrated starter/alternator ? primary switch for 12v systems d g s g s d to-252 d-pak (to-252) mosfet maximum ratings t j = 25c unless otherwise noted. symbol parameter ratings units v dss drain-to-source voltage 80 v v gs gate-to-source voltage 20 v i d drain current - continuous (v gs =10) (note 1) t c = 25c 90 a pulsed drain current t c = 25c see figure 4 e as single pulse avalanche energy (note 2) 29 mj p d power dissipation 150 w derate above 25 o c1 . 0 w / o c t j , t stg operating and storage temperature -55 to + 175 o c r jc thermal resistance, junction to case 1.0 o c/w r ja maximum thermal resistance, junction to ambient (note 3) 52 o c/w package marking and ordering information device marking device package reel size tape width quantity FDD86369 FDD86369 d-pak(to-252) 13? 16 mm 2500 units notes: 1: current is limited by bondwire configuration. 2: starting t j = 25c, l = 14 h, i as = 64a, v dd = 80v during inductor charging and v dd = 0v during time in avalanche. 3: r ja is the sum of the junction-to-case and case-to-ambient thermal resistance, where the case thermal reference is defined as the solder mounting surface of the drain pins. r jc is guaranteed by design, while r ja is determined by the board design. the maximum rating presented here is based on mounting on a 1 in 2 pad of 2oz copper. for ? current ? package ? drawing, ? please ? refer ? to ? the ? on ? website ? at ? http://www.fairchildsemi.com/package \ drawings/ to/to252a03.pdf
FDD86369 n-channel powertrench ? mosfet www.onsemi.com 2 electrical characteristics t j = 25c unless otherwise noted. off characteristics on characteristics dynamic characteristics symbol parameter test conditions min. typ. max. units b vdss drain-to-source breakdown voltage i d = 250 p a, v gs = 0v 80 - - v i dss drain-to-source leakage current v ds = 8 0 v , t j = 25 o c --1 p a v gs = 0v t j = 175 o c (note 4) - - 1 ma i gss gate-to-source leakage current v gs = 20v - - 100 na v gs(th) gate to source threshold voltage v gs = v ds , i d = 250 p a 2.0 2.7 4.0 v r ds(on) drain to source on resistance i d = 80a, v gs = 10v t j = 25 o c -5.97.9m : t j = 175 o c (note 4) - 13.0 17.4 m : c iss input capacitance v ds = 40v, v gs = 0v, f = 1mhz - 2530 - pf c oss output capacitance - 430 - pf c rss reverse transfer capacitance - 16 - pf r g gate resistance v gs = 0.5v, f = 1mhz - 2.2 - : q g(tot) total gate charge v gs = 0 to 10v v dd = 64v i d = 80a -3654nc q g(th) threshold gate charge v gs = 0 to 2v - 4.6 - nc q gs gate-to-source gate charge -13-nc q gd gate-to-drain ?miller? charge - 8.5 - nc switching characteristics drain-source diode characteristics note: 4: the maximum value is specified by design at t j = 175c. product is not tested to this condition in production. t on turn-on time v dd = 40v, i d = 80a, v gs = 10v, r gen = 6 : - - 70 ns t d(on) turn-on delay - 13 - ns t r rise time - 34 - ns t d(off) turn-off delay - 22 - ns t f fall time - 9 - ns t off turn-off time - - 46 ns v sd source-to-drain diode voltage i sd =80a, v gs = 0v - - 1.25 v i sd = 40a, v gs = 0v - - 1.2 v t rr reverse-recovery time i f = 80a, di sd /dt = 100a/ p s -4964ns q rr reverse-recovery charge - 40 53 nc
FDD86369 n-channel powertrench ? mosfet www.onsemi.com 3 typical characteristics figure 1. normalized power dissipation vs. case temperature 0 25 50 75 100 125 150 175 0.0 0.2 0.4 0.6 0.8 1.0 1.2 power dissipation multiplier t c , case temperature( o c) figure 2. maximum continuous drain current vs. case temperature 25 50 75 100 125 150 175 200 0 20 40 60 80 100 120 current limited by silicon current limited by package v gs = 10v i d , drain current (a) t c , case temperature( o c) figure 3. 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0.01 0.1 1 single pulse d = 0.50 0.20 0.10 0.05 0.02 0.01 normalized thermal impedance, z jc t, rectangular pulse duration(s) duty cycle - descending order 2 notes: duty factor: d = t 1 /t 2 peak t j = p dm x z ja x r ja + t c p dm t 1 t 2 normalized maximum transient thermal impedance figure 4. peak current capability 10 -5 10 -4 10 -3 10 -2 10 -1 11 0 10 100 10 00 v gs = 10v single pulse i dm , peak curr ent (a) t, rectangular pulse duration(s) t c = 25 o c i = i 2 175 - t c 150 for temperatures above 25 o c derate peak current as follows:
FDD86369 n-channel powertrench ? mosfet www.onsemi.com 4 figure 5. 1 10 100 200 0.01 0.1 1 10 100 1000 100us 1ms 10ms i d , drain current (a) v ds , drain to source voltage (v) operation in this area may be limited by r ds(on) single pulse t j = max rated t c = 25 o c 100ms forward bias safe operating area 0.001 0.01 0.1 1 10 100 1 10 100 500 starting t j = 150 o c starting t j = 25 o c i as , avalanche current (a) t av , time in avalanche (ms) t av = (l)(i as )/(1.3*rated bv dss - v dd ) if r = 0 if r 0 t av = (l/r)ln[(i as *r)/(1.3*rated bv dss - v dd ) +1] note: refer to on application notes an7514 and an7515 figure 6. unclamped inductive switching c apability figure 7. 24681 0 0 50 100 150 200 t j = -55 o c t j = 25 o c t j = 175 o c pulse duration = 80 s duty cycle = 0.5% max v dd = 5v i d , drain current (a) v gs , gate to source voltage (v) transfer characteristics figure 8. 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100 400 t j = 25 o c t j = 175 o c v gs = 0 v i s , reverse drain current (a) v sd , body diode forward voltage (v) forward diode characteristics figure 9. 012345 0 50 100 150 200 v gs 15v top 10v 8v 7v 6v 5.5v 5v bottom 80 s pulse width tj=25 o c i d , drain current (a) v ds , drain to source voltage (v) saturation characteristics figure 10. 012345 0 50 100 150 200 5.5v i d , drain current (a) v ds , drain to source voltage (v) v gs 15v top 10v 8v 7v 6v 5.5v 5v bottom 80 s pulse width tj=175 o c saturation characteristics typical characteristics
FDD86369 n-channel powertrench ? mosfet www.onsemi.com 5 figure 11. 5678910 0 20 40 60 80 100 i d = 80a pulse duration = 80 s duty cycle = 0.5% max r ds(on) , drain to source on-resistance ( m ) v gs , gate to source voltage (v) t j = 25 o c t j = 175 o c r dson vs. gate voltage figure 12. normalized r dson vs. junction temperature -80 -40 0 40 80 120 160 200 0.4 0.8 1.2 1.6 2.0 2.4 pulse duration = 80 s duty cycle = 0.5% max i d = 80a v gs = 10v normalized drain to source on-resistance t j , junction temperature ( o c ) figure 13. -80 -40 0 40 80 120 160 200 0.0 0.3 0.6 0.9 1.2 1.5 v gs = v ds i d = 250 a normalized gate threshold voltage t j , junction temperature( o c) normalized gate threshold voltage vs. temperature figure 14. -80 -40 0 40 80 120 160 200 0.90 0.95 1.00 1.05 1.10 i d = 5ma normalized drain to source breakdown voltage t j , junction temperature ( o c) normalized drain to source breakdown voltage vs. junction temperature figure 15. 0.1 1 10 100 1 10 100 1000 10000 f = 1mhz v gs = 0v c rss c oss c iss capacitance (pf) v ds , drain to source voltage ( v ) capacitance vs. drain to source voltage figure 16. 0 5 10 15 20 25 30 35 40 0 2 4 6 8 10 v dd = 40v v dd =32v i d = 80a v dd = 48v q g , gate charge(nc) v gs , gate to source voltage(v) gate charge vs. gate to source voltage typical characteristics
www. onsemi.com 1 on semiconductor and are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries i n the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . a listing of on semiconductor?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent ? marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does o n semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. ?typical? parameters which may be provided in on semiconductor data sheets and/or specifications can and do vary in dif ferent applications and actual performance may vary over time. all operating parameters, including ?typic als? must be validated for each customer application by customer?s technical experts. on semiconductor does not convey any license under its patent rights nor the right s of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semicondu ctor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its officers, employees, subsidiaries, affiliates, and distrib utors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 www.onsemi.com literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative ? semiconductor components industries, llc
|
